GripSafe®ST — Inboard Insertion Blocking (IIB) Reverse Pressure Test Plug
3/4" – 36" Specifications & Ratings | Document M-GSST-IIB-3/4-24-2.5
| NPS (in) |
Schedule | Part Number | Tool Dia. (in) |
Rec. ID Range* (in) |
Nom. Pipe ID Clearance (in) |
Approx. Wt. (lbs) |
Tool Length (in) |
Torque Range (ft-lbs) |
Comp. Hex Nut Socket (in) |
Back Pressure Vent Thread |
Test Pressure Rating (PSI)* |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Norm | Max | |||||||||||
● NEVER EXCEED THE MAXIMUM RATED PRESSURE OF THE LOWEST RATED COMPONENT IN THE SYSTEM.
* Larger sizes and custom configurations available upon request.
NPS 6–24: Tool OD must be within 1/8" concentricity to the pipe ID.
Test Pressure Rating: Maximum rated test pressure for the inboard (reverse) direction. PRD notes shown in red where applicable.
(P-XXXX): When testing in ANSI A106 Grade B pipe, a Pipe Reinforcement Device (PRD) is required if test pressure exceeds the P-value shown. For non-A106 B material, consult USA Industries engineering. A PRD is strongly recommended for all pipes 10/10S and thinner walled.
Data is subject to change. Consult manufacturer to verify this is the latest release.
USA Industries — South Houston, TX | Prairieville, LA — (800) 456-8721 — www.USAIndustries.com
* Larger sizes and custom configurations available upon request.
NPS 6–24: Tool OD must be within 1/8" concentricity to the pipe ID.
Test Pressure Rating: Maximum rated test pressure for the inboard (reverse) direction. PRD notes shown in red where applicable.
(P-XXXX): When testing in ANSI A106 Grade B pipe, a Pipe Reinforcement Device (PRD) is required if test pressure exceeds the P-value shown. For non-A106 B material, consult USA Industries engineering. A PRD is strongly recommended for all pipes 10/10S and thinner walled.
Data is subject to change. Consult manufacturer to verify this is the latest release.
USA Industries — South Houston, TX | Prairieville, LA — (800) 456-8721 — www.USAIndustries.com
©2024 USA Industries • ISO 9001:2015 • M-GSST-IIB-3/4-24-2.5