Pressure Safety Valve (PSV) Storage Racks
For Quicker & Easier PSV Maintenance, Repair or Replacement. Available in 3 Standard Sizes + Custom.
PSV-610 (6" to 10")
Flange & Valve Ranges
PSV-1216 (12" - 16")
Flange & Valve Ranges
PSV-1824 (18" - 24")
Flange & Valve Ranges
Using the Slotted Openings Machined into Each Rack Size, the Pressure Safety Valves and/or Flanges are Mounted via Nuts & Bolts to the Frame
(Front)
(Back)
(Side)
(Overhead)
BENEFITS OF A CUSTOM PSV RACK
Pressure Safety Valves (PSVs) are the first thing off of a unit during maintenance, outages and turnarounds. PSVs always have priority during any shut down and need to be the first part re-installed after being serviced, repaired or replaced. PSV removal and transportation delays can result in significant additional costs to a project.
USA Industries’ Pressure Safety Valve Racks provide an efficient and standardized solution for transporting pressure safety valves of all sizes while keeping them upright. With a design that facilitates quicker and easier loading of your PSVs, you can rent cranes, trucks, and other equipment for shorter periods, ultimately reducing project costs. Additionally, opting for our uniform racks saves you time and labor, eliminating the need for skilled workers to construct custom racks from various materials.
Do you need a custom PSV Rack? Our in-house engineering and fabrication teams can also customize a Pressure Safety Valve Rack to your exact needs. Fill in the detailed form below, and then submit to start the process of building a custom PSV Rack for your project needs.
Frequently Asked Questions
The large Pressure Safety Valve Rack can hold 12 total valves, 2 large valves on the bottom, and 10 small valves on the top (dependent on size).
The small Rack can hold 14 total valves, 7 valves on each side, as long as you can position them so the bolts don't interfere with each other (dependent on size).
These racks work with any PSV pulled off of a refinery / chemical unit, including pressure safety valves from drums, columns, exhausts, and more...
Each PSV bolts through the slit in the PSV Rack. For small PSVs, you can also secure them to the flanges on the top of the large PSV Rack.
The PSV Rack is delivered to your project site by truck. You are required to offload and place it on your site. The rack is forklift-accessible at the bottom.
We custom make our PSV racks as their ordered, and typically require 1 week for manufacturing. If you need it sooner, we can rush production for you. Shipping times are dependant on location.
Yes! We can customize our racks to accomodate your specific needs.