Snap It® Kit
Install & Removal Tools

Cut Your Delivery Time

FROM
WEEKS
TO DAYS!

See how fast we can deliver!

Snap It tube plugs install quickly and easily using the USA Industries Snap It Installation and Removal Tools Kit — with tools available in multiple sizes to buy or rent, so you can save time and simplify the process from the start.

For the ultimate in convenience, our new cordless EZ Snap Pro Installation Tool takes efficiency to the next level, delivering fast, effortless plug installation without the hassle of cords, hoses, hydraulic pumps or compressed air.

Already have your own equipment? No problem. Snap It plugs are engineered to work seamlessly with your existing hydraulic rams, assemblies, and extenders, so you get maximum efficiency without the added expense.

Snap It Kit Features

Tube Prep Tools

Installation Tools

Removal Tools

Snap It Jr. Plug in Tube Illustration

Snap It Sr. Plug in Tube Illustration

Installing Tube Plugs?

SNAP IT KIT PRODUCT FEATURES:

Experienced users install plugs in 60 seconds or less
Header Boxes and Channel Heads do not need to be removed
Eliminates problems from hammer-driven or welded plugs
Available for rent or purchase
In-stock kits ship within 24 hours

With USA Industries' Snap It installation and removal tools, the process of plugging your heat exchangers, boilers and condensers couldn't be easier! Now you can remove or eliminate problems caused by welded or hammer-driven tube plugs, such as: safety risks, inconsistent installation, unpredictable pressure-holding capacity, damage to tube sheets, holes and tubes, as well as time-consuming and expensive welding costs!

Note: Always puncture the tube before installing any plug to ensure that pressure cannot build up in the tube and cause the plugs to loosen or blow out. Never stand in front of any installed plug under pressure. Plugs ejected under pressure can cause serious bodily injury.

Tube Preparation Tools

Tube brushes are ideal for properly prepping your heat exchanger tubes for a tube plug. The brushes remove pitting and corrosion from inside the tube, allowing optimum sealing and holding forces for your Snap It tube plug. Because Snap It Jr. has a range of tube sizes that it can effectively seal, brush kits come with 3-4 brushes per kit. Use the smallest brush in your brush kit that effectively cleans and preps the tube. Snap It Sr. brushes are provided for the exact tube size ordered, ensuring a perfect fit. This step is absolutely crucial to ensuring you have the optimal seal with your tube plugs.

Installation Tools

The hydraulic ram is the simplest, safest, quickest and easiest way to install Snap It Sr or Snap It Jr tube plugs. This installation kit is compact and lightweight (the ram only weighs 7 lbs) yet it has plenty of power to easily install all of our tube plugs. The pump is air driven and requires 80 to 120 lbs of supply air @ 20CFM during the few seconds it is operated and comes in a durable storage case on wheels. When you order the complete kit - it comes with everything needed for installing Snap It Jr or Sr Plugs for near end applications.

Through the tube plugging, for far end applications, is performed with the same tool by adding the appropriate number of extension assemblies with a channel head pull rod assembly (CHPRA) and following the "through the tube" instructions. Order this complete kit if you want to go into your next turnaround with complete peace of mind!

Pull Rod Assembly - Used with the Hydraulic RAM, this assembly installs the plug in place. Our assemblies are fully interchangeable with competitors' systems and have been designed to minimize your costs by utilizing multiple plug positioners with each pull rod size.

Channel Head Pull Rod Assemblies & Extension Sets - Used to operate the system and easily install plugs where channel heads are present. These are also used in conjunction with the extension sets for through the tube plugging.

Removal Tools

Designed to easily and quickly remove installed tube plugs. The plug removal tool removes both the pin and ring in seconds without damage to the tube or tube sheet it was installed in. Simply screw the spear stud into the installed pin, dislodge the pin with the slide hammer, screw the spear into the ring, then use the slide hammer to pull out all the pieces. If required, a new plug can then be reinstalled in the same place!

NOTE: Contact USA Industries for sizing details and questions.

New Innovation

EZ Snap Pro
Cordless Tool

USA Industries' latest innovation, built to install Snap It® Engineered Tube Plugs in heat exchangers, boilers, and condensers. This fully self-contained, battery-powered hydraulic unit eliminates shop air, external pumps, hoses, and electrical connections.

No cords. No hoses. No trip hazards.

Just reliable power wherever the job takes you.

Fully self-contained system — no plant air or electrical hookup required
Eliminates hoses and trip hazards for safer, cleaner job sites
Ideal for confined spaces, remote areas, and elevated work zones
Enhanced 18v / 5.0Ah lithium-ion battery for extended runtime
Install up to 800 tube plugs on a single charge
Compatible with BAW and Pull-to-Pressure installation methods
Advanced multi-user digital display with programmable presets and installation logging
Reinforced housing engineered for harsh industrial environments
Compact, ergonomic design — 7 lbs. (3.2 kg) with heavy-duty grip

Learn More